TRX-4 Rear Shock Tower Adjustable 6061 T6 - TRX4030A by GPM  [TRX4030A]

Rear shock tower with adjustable mounting for TRX-4

This aluminium rear shock tower is offered as a direct aftermarket upgrade for the TRAXXAS TRX4 Trail Crawler platform to vary shock mounting points and tune rear suspension geometry. The tower features several mounting holes so the shock can be secured at different heights and angles, enabling stepwise changes to leverage and ride height without cutting or altering the shock itself.

Built from 6061 T6 aluminium to combine low weight and strength, the tower provides a stiffer mounting point than the OEM plastic unit. It mounts in the rear shock tower location and is adjusted by moving the shock eye to an alternate hole to alter angle and effective stroke.

The package contains two towers and the stainless fastening hardware needed for fitting. If you plan to use this on other TRX-4 variants, check the rear skid area as small trim may be required for clearance.

Use this tower to achieve repeatable tuning of rear shock angle and ride height for crawling, with adjustments that are reversible and serviceable.