TRX4M Brass Front/Rear Axle Cover TRX4M012AX by GPM  [TRX4M012AX]

TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX
Price:
NZD$37.54
Brand:
GPM
Model:
TRX4M012AX
GTIN:
4894538369533
Condition:
Brand New
Write a review
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"
alt="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX" title="TRAXXAS TRX4M FORD BRONCO 97074-1 Brass Front/Rear AXLE Cover - GPM TRX4M012AX"

Brass axle cover designed for TRX4M

This brass axle cover is an RC-scale replacement produced for the TRX4M platform. It fits over the front or rear axle cover openings to protect the housing and increase mass at the axle for better low-speed traction feel.

The component is brass and ships with cap head screws so you can fit it without hunting for additional hardware. At around 13 grams, the added mass offers a measurable change in axle behaviour useful when tuning differential feel on-scale trails.

Packing includes

  • Axle cover - 1pcs
  • Cap head screws 1.4*12 - 4pcs

Original Name / Part No:

9738

Compatible Models

  • TRAXXAS-1/18 4WD TRX4M FORD BRONCO-97074-1
  • TRAXXAS-1/18 4WD TRX4M LAND ROVER DEFENDER-97054-1

Use this brass cover to add axle housing protection and a small but useful ballast for tuning differential damping on TRX4M 1/18 Bronco and Defender kits; screws are included for direct front and rear mounting.

Which chassis is this compatible with?

It is compatible with the TRX4M 1/18 listings shown in the compatibility box, including the Ford Bronco 97074-1 and the Land Rover Defender 97054-1.

Will the supplied screws fit other axle parts?

The cap head screws 1.4x12 are intended for the axle cover holes; compatibility with other parts depends on hole size but they are generally suitable for direct replacement locations.

Does the extra weight change handling?

Adding about 13g at the axle helps dampen rotational feedback and can make differential action feel smoother on technical crawls and tight turns.

Is any machining required before fitting?

No machining is required; the part is ready to fit and includes the necessary cap head screws for installation in the axle cover positions.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved