TRX6 Brass Wheel Hex Adapters 12mm for TRAXXAS TRX6 TRX6010X/12M by GPM  [TRX6010X/12M]

TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M
Price:
NZD$37.39
Brand:
GPM
Model:
TRX6010X/12M
GTIN:
4894538348286
Condition:
Brand New
Write a review
alt="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M" title="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M"
alt="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M" title="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M"
alt="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M" title="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M"
alt="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M" title="TRAXXAS TRX6 MERCEDES-BENZ Brass Wheel Hex Adapters 12mm - 30pc set - GPM TRX6010X/12M"

Brass hex adapters tailored for TRX6 wheel hubs

This brass 12mm hex adapter set is produced to fit TRAXXAS TRX6 MERCEDES-BENZ applications and is identified as TRX6010X/12M from GPM. It couples the wheel hex to drive components, acting as the connection point for the front CVDs and rear drive shafts.

The brass construction adds measurable weight at the hub, which some operators find helps momentum in slow-speed trail work, and the broader flange shifts the wheel outward slightly to close the radial gap between hub and tyre. Included are the mounting screws, shims and washers required for typical wheel hex installation.

Packing includes

  • Hex Adapter - 6pcs
  • Stainless Steel Screw Shaft M4x2.5x11.8 - 6pcs
  • Shims 5mm - 6pcs
  • 5mm Metal Washer - 6pcs
  • Stainless Steel Hex Socket Screw 11mm - 6pcs

Original Name / Part No:

Part location:Hex adpaters

Specifications

  • Item: Brass wheel hex adapters 12mm, 30pcs set
  • Material: Brass
  • Model Number: GPM TRX6010X/12M
  • Compatibility: TRAXXAS TRX6 MERCEDES-BENZ 88096-4

Perfect for scale setups needing a bit more hub weight and a small track increase; always trial-fit on your TRX6 to check for tyre or suspension interference.

Will these fit stock TRX6 wheel hexes?

They are designed for standard TRX6 hex positions, but check that your wheel inner diameter and hex profile match before final mounting.

How much do they change the track width?

The wider flange produces a modest outward offset that increases effective track by a small amount; measure with your chosen wheels to confirm clearance.

Are replacement screws available?

The kit includes stainless screw shafts and hex socket screws; if you need replacements use equivalent M4 hardware with the same lengths and head types.

Do these require gearbox changes?

No gearbox modifications are needed; these adapters mount at the wheel hub and interface with existing CVDs and drive shafts.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved