Tamiya 85036 TS-36 Fluorescent Red Hobby Spray Can  [85036]

Tamiya 85036 - TS-36 Fluorescent Red
Price:
NZD$9.78
Brand:
Tamiya
Model:
85036
GTIN:
4950344850365
Condition:
Brand New
Write a review

Colour Pop for Plastic Kits with Tamiya TS-36

Tamiya TS-36 Fluorescent Red is a synthetic acrylic lacquer spray designed to give models a vivid, attention-grabbing finish. Its fast-drying nature helps reduce wait time between coats, and a single 100ml can covers several 1/24 scale car bodies.

Works Over Acrylics and Enamels

This lacquer can be applied over fully cured acrylic or enamel paints, letting you mix paint systems in the same build. Make sure the previous layers are dry to avoid any lifting or reaction.

Suited to Full-Body Spraying

Designed for broad, consistent coverage, TS-36 handles large model panels well. Use controlled, light passes to build up colour evenly and avoid heavy runs on curved shells.

No, it will not adhere correctly to lexan polycarbonate and can cause softening or poor adhesion. Select Tamiya PS series paints for lexan RC bodywork.
Yes, as long as the existing paint is fully cured and clean. Light scuffing or degreasing will help the lacquer bond better to slick surfaces.
Keep spray strokes steady and overlap passes by about 50 percent. Maintain the recommended distance and apply several thin coats rather than one heavy layer to minimise texture.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved