TT-01 Adjustable Rear Camber Arms for TAMIYA - TT01-21 by 3Racing [TT01-21]

Tamiya TT-01 /TT-01 TYPE E Rear Camber Suspension Arm Set - 3Racing TT01-21

Price:

NZD$19.54

Brand:

3Racing

Model:

TT01-21

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Tamiya - TT-01

Rear camber arm kit for TT-01

This camber arm set is made for TAMIYA TT-01 and TT-01 TYPE E chassis, listed as 3Racing part TT01-21. It functions as a direct replacement for the rear lower arms, providing the mounting points needed to control rear camber and wheel alignment.

In use the arms re-establish proper mounting locations for the rear uprights and linkages, so camber adjustments remain simple during setup or after parts replacement. They are intended for use when original arms become worn or damaged.

Installation notes and tuning role:

Fit and alignment: check the fit against the TT-01 uprights and retain compatible mounting hardware where possible; confirm pivot clearance before final torque.
Routine checks: inspect pivot locations for play after refit and verify camber with your usual setup procedure to keep handling consistent.
Tuning role: the arms preserve stock geometry, so camber is tuned via link adjustments and shim stacking on the upright rather than modifying the arm.

Are these compatible with TT-01 TYPE E?

Yes, the part is specified for both TT-01 and TT-01 TYPE E platforms and matches the standard rear lower arm interface.

Will I need extra parts to install?

Usually no; existing mounting pins and screws are often re-usable, but check condition and replace hardware if worn.

How do these affect tuning?

They keep the original mounting geometry so tuning is done with links and shims to alter camber as needed.