VANQUISH H10 OPTIC Link Bar Upgrade Set (Upper & Lower) 7075-T6 - H101449 by GPM  [H101449]

Raised-clearance link bar upgrade

This 1/10-scale accessory is an upper and lower link bar set produced by GPM for the VANQUISH H10 OPTIC crawler platform, designed for hobby use in radio-controlled rigs. The kit is a direct alternative to part IRC00307 and is CNC machined from 7075-T6 aluminum to preserve suspension geometry while lifting clearance to limit chassis hang-ups on rough lines.

Lower link geometry is high-clearance with a centre point of 138mm and thickness of 6.5mm. Upper links vary between front and rear: the front upper link has a 139mm centre point with 4.0mm thickness, and the rear upper link has a 129mm centre point with 5.0mm thickness. These sizes keep the original suspension kinematics intact for predictable crawling.

Items come pre-assembled in the box. It is advised to use medium-strength screw glue on metal-to-metal fasteners to reduce the chance of loosening from vibration and repeated articulation. Check link alignment and clearance through full suspension travel before final torquing.

For trail-focused builds on the VANQUISH H10 OPTIC platform, this 7075-T6 aluminium link set preserves intended geometry while raising contact points to help clear obstacles during technical crawls.