VANQUISH H10 OPTIC Upper Link Bars H10049FR by GPM  [H10049FR]

VANQUISH H10 OPTIC H10049FR 7075-T6 Upper Link Bars for 1/10 Electric Buggy

Alloy build and design intent

The H10049FR upper link bars are manufactured from 7075-T6 aluminium with an integrated shape that raises stiffness over typical stamped or moulded links. The arcuated contour around the steel pivot-ball seats helps retain the balls while keeping factory mounting angles intact.

Measured dimensions and compatibility

Key measurements for fit confirmation are detailed: front upper link centre-to-centre is 139 mm with a section thickness of 4.0 mm; rear upper link centre-to-centre is 129 mm with a thickness of 5.0 mm. This set replaces factory part IRC00307 and preserves the stock pivot-ball spacing so it mounts on the same posts.

Practical effects on handling

Using 7075-T6 alloy increases both longitudinal and torsional stiffness across the link plane. On an electric buggy chassis this typically yields a steadier link plane under load, making directional inputs feel more predictable on rough surfaces. The monolithic profile minimises flex paths found in multi-piece links while keeping suspension geometry unchanged.

Supported models list

Designed for the VANQUISH H10 Optic range. Check the following model identifiers to verify fit:

• VANQUISH PRODUCTS 1/10 H10 OPTIC KIT-VPS09027
• VANQUISH PRODUCTS 1/10 H10 Optic Yokohama RTR-VPS09010A
• VANQUISH PRODUCTS 1/10 H10 Optic Sparco RTR-VPS09010B

Package details and original reference

The kit includes four upper link bars supplied together as a set. The original name and part reference is IRC00307. A medium-strength screw adhesive is recommended to help prevent fasteners loosening during use.

GPM H10049FR upper link bars provide a direct-fit 7075-T6 alloy upgrade for H10 Optic variants, easing replacement and adding firmer link support for drivers tuning handling at the component level.