VW Dune Beetle Cross Tamiya 58757 1/9 Scale BB-02 Off-Road Buggy Kit  [58757]

Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)
Price:
NZD$0.00
Brand:
Tamiya
Model:
58757
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)" title="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)"
alt="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)" title="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)"
alt="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)" title="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)"
alt="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)" title="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)"
alt="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)" title="Tamiya 58757 - 1/9 VW Dune Beetle Cross (BB-02 Chassis)"

Tamiya 58757 VW Dune Beetle Cross — BB-02 rear-drive buggy with 1/9 race-style body

Underbody and mechanical design

The BB-02 chassis fitted to this kit uses a rear-wheel-drive layout that places the electric motor aft of a lengthwise battery compartment to bias weight rearward. A sealed gearbox houses drivetrain components and includes a pressure plate ball differential; protective boots are fitted to the drive shafts to shield joints from grit and dust. The floorpan integrates a tubular roll cage and pronounced wheel housings, lending a competition-influenced structural look while protecting internals on loose surfaces.

Drivetrain and suspension details

Included are two front suspension setups — front double trailing arms or front double wishbone arms — accompanied by rear trailing arms. The oil-filled CVA-style dampers reduce leakage by using a seal profile that shifts with piston movement. Full ball bearings are supplied throughout, while hex hub wheels are paired with directional rib front tyres and square-spike rear tyres to balance steering response and traction across varied terrain.

Scale bodywork and finishing touches

The polycarbonate body, scaled to 1/9, recreates a race-oriented Beetle silhouette with pronounced fenders and an open rear deck. Molded details include light pods and housings for optional LEDs, a window net, exhaust accents, and cockpit accessories such as a stick shift and air cleaner. Seated driver and co-driver figures plus themed stickers are provided to complete the presentation without representing any particular racing team.

Intended audience and use

As a kit intended for assembly, it is best suited to enthusiasts who enjoy building and finishing models. The BB-02 platform and component selection prioritise durability and mechanical realism over minimal weight, making the model suitable for hobby driving and display.

Specifications

  • Label: Tamiya 58757 VW Dune Beetle Cross
  • Scale: 1/9
  • Construction Type: Assembly Kit
  • Chassis Type: BB-02
  • Drive Type: 2WD
  • Body Material: Polycarbonate
  • Length: 454 mm
  • Width: 204 mm (double trailing arm) / 225 mm (double wishbone)
  • Height: 180 mm
  • Wheelbase: 283 mm
  • Differential Type: Pressure Plate Ball Differential
  • Suspension: Front double trailing arm and front double wishbone included, rear trailing arm
  • Shock Damper: CVA Oil-Filled Adaptive Damper
  • Electronic Speed Control (ESC): Not Included
  • Motor: Sold Separately (540-size compatible)
  • Bearings: Full Ball Bearings Included

The Tamiya 58757 VW Dune Beetle Cross offers a satisfying build for modelers who prefer a heavier, realistic scale buggy with a sealed drivetrain and race-influenced appearance.

The kit does not include a motor or ESC; it accepts a 540-size motor and requires a separately purchased ESC and radio system to complete the drivetrain and control electronics.
The sealed gearbox incorporates a pressure plate ball differential as the primary differential mechanism, helping to manage power delivery to the driven wheels.
Yes. The kit includes components for both front double trailing arms and front double wishbone configurations, so builders can choose or switch setups to alter handling characteristics.
Light buckets and housings are provided to accept optional LEDs, but the lighting units themselves are sold separately if you want working illumination.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved