Wood Series Master Airscrew MA2010B 20x10 Prop - RC Plane Replacement  [MA2010B]

MASTER AIRSCREW WOOD SERIES 20x10 PROPELLER
Price:
NZD$38.26
Brand:
Master Airscrew
Model:
MA2010B
Condition:
Brand New
Write a review

What this 20x10 wood prop delivers

The Master Airscrew WOOD SERIES 20x10 propeller is offered as a scale-style replacement for model aircraft specifying a 20x10 prop. Laminated wood construction provides consistent thrust behavior and a traditional feel favored on many sport aircraft.

For installation, replace with a like-size blade and secure using the spinner, nut, or adapter recommended by your motor or airframe supplier. Observe correct mounting torque and safety checks. Always balance the prop to reduce vibration and protect electronics and airframe parts.

Using a 20x10 wooden prop will influence climb rate and throttle response; any change to blade material, diameter, or pitch will shift performance, so treat this item as a direct swap when tuning or replacing worn props.

Specifications

  • Item Propeller
  • Material Wood
  • Model Number MA2010B
  • Compatibility RC model aircraft requiring a 20x10 propeller size

Fit this Master Airscrew wooden prop as a direct 20x10 replacement, confirm hub compatibility and balance, then perform a preflight vibration check.

How should I balance this propeller?

Begin with a simple prop balancer or shaft-mounted method, trim tiny amounts from the heavy side if required, and confirm balance both statically and at operating rpm where possible.

Will pitch or diameter changes improve climb?

Yes. Increasing pitch or diameter generally boosts top speed while reducing acceleration; for better climb you may choose a lower pitch or larger diameter, but keep within safe motor and ESC limits.

Any special care for wooden props?

Store in a dry, stable environment to avoid warping, inspect for nicks or splits after each flight, and sand or replace the prop if you detect damage or imbalance.

Does this fit all 20x10 hubs?

Fit depends on the hub bore and adapter used. Confirm the hub diameter and use the correct adapter or nut supplied by your motor or airframe to ensure a secure connection.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved