X26 Lower Wishbone Arm for Front Suspension Serpent 402171  [SER402171]

Front lower control arm for X26

The Serpent 402171 front lower wishbone is supplied as a spare part for X26-series electric on-road cars, built to replace the standard lower arm. It locates the front hub, transmits suspension loads, and modifies camber and roll behaviour under dynamic conditions.

Compatibility aligns with X26 chassis arrangements and Serpent component groups; confirm the chassis layout and reference numbers before fitting. The item is made to work with the stock hub carriers, ball studs, and associated fasteners used on X26 front assemblies.

Installation guidance: align the wishbone so any locating features or ribs match the chassis bosses, ensure the ball stud is fully engaged in the socket, and screw fasteners to the original thread depth. Once fitted, inspect left/right geometry and check wheel alignment while the car is at ride height.

Tuning notes: the lower wishbone has a direct influence on camber change throughout travel, roll centre position, and initial turn-in. Replacing the arm will alter front stiffness and steering feedback when used with different anti-roll bars, damper valving, or toe settings.