XB8E Aluminium Chassis Upgrade Narrow Lower Battery - 351193 by XRAY  [XR-351193]

XRAY 351193 - XB8E 26 Aluminium Chassis For Narrow & Lower Battery Position - Swiss 7075 T6 (3mm)
Price:
NZD$271.87
Brand:
XRAY
Model:
XR-351193
Condition:
Brand New
Write a review

Precision 3mm Swiss 7075 T6 Chassis for XB8E

This aluminium chassis has been developed specifically for the XRAY XB8E platform to support a narrower stance and a reduced battery height. It integrates modified battery trays, a revised electronics plate and a covered receiver box to position the battery lower and closer to the centreline for improved mass distribution.

Manufactured from Swiss 7075 T6 aluminium at a 3mm thickness, the plate includes selective material removal and purpose-cut flex zones to manage stiffness and ensure repeatable flex characteristics. The updated rear C-holder placement is part of the layout revisions that influence traction and high-speed stability under different track conditions.

For setup, expect the chassis geometry and flex calibration to have a direct effect on traction, steering response and overall equilibrium. After fitting, double-check battery orientation, electronics layout and consider small suspension adjustments to exploit the narrower, lower centreline configuration.

Specifications

  • Item: Aluminium chassis plate for XB8E platform
  • Material: Swiss 7075 T6 aluminium
  • Model Number: 351193
  • Thickness: 3mm
  • Finish: Hard-anodized surface
  • Compatibility: XB8E 2026 / XB8E narrow and lower battery layout
  • Key Features: Revised battery trays, electronics plate, covered receiver box, revised rear C-holder position, specially milled flex areas

Intended as a direct replacement or an upgrade for XB8E 2026 setups, this CNC-machined 3mm chassis plate is aimed at refining weight balance and making handling more predictable for competitive track use.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the new battery trays accept the same pack sizes?

The trays are revised for a lower and narrower position; confirm your battery dimensions against the tray envelope before installation to ensure correct fit.

Do the milled flex areas change tuning options?

Yes, the milled flex zones alter chassis compliance, which can shift traction balance; use small incremental changes to suspension and toe to find the new neutral point.

Should I change shock settings after fitting?

Often a slight adjustment to damping or spring rate helps compensate for the changed roll behavior caused by the lower battery location; test on a controlled layout to dial it in.

How does the rear C-holder relocation affect traction?

Moving the rear C-holder shifts rear roll and weight transfer characteristics, which can increase rear bite in some conditions and require balancing front grip accordingly.

Is the hard-anodize finish durable for frequent running?

The hard-anodized coating improves surface wear resistance and is suitable for regular track use, though extreme impacts can still mark the surface.

Any recommended checks after installation?

Verify battery and receiver fit, re-check screw torque at mounting points, and run a handling test to confirm suspension and roll center settings match the new layout.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved