Xenon Racing G64-3078 Fine Tooth 64 Pitch 78T Spur Gear  [G64-3078]

Xenon Racing 64 Pitch VVS EX Spur Gear for pancar & touring car, 78T G64-3078
Price:
NZD$12.23
Brand:
Xenon Racing
Model:
G64-3078
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Precision Gearing for Club and Circuit

The Xenon Racing 64 Pitch VVS EX Spur Gear, model G64-3078, provides a 78-tooth layout aimed at reducing backlash and improving throttle response in pancar and touring car platforms. Its tooth geometry promotes steady engagement under load.

Built for Racing Conditions

With a 64 pitch specification, this spur gear offers finer engagement than coarser pitches while retaining strength for track use. The design helps keep power delivery consistent during hard acceleration and tight cornering.

Compatibility and Practical Use

Xenon Racing produces parts to tight tolerances so the G64-3078 integrates with many popular pancar and touring setups. It is a practical option whether you are swapping gearing for a specific ratio or replacing a worn part.

How do I set the correct mesh with the G64-3078 spur gear?

Start with a paper shim method or a plastic gauge to achieve a small clearance between pinion and spur teeth, then tighten and recheck after a short run to confirm no binding.

Which surfaces work best with this spur gear in pancar racing?

The 64 pitch 78T is commonly used on carpet and smooth asphalt where fine tooth engagement reduces noise and improves predictable power delivery.

Can I mix this spur with a different brand of pinion?

Yes, as long as the pinion matches 64 pitch and the mounting pattern fits. Check fitment and run a bench test to confirm smooth engagement before track use.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved