XRAY 302056 X4 Graphite Front Brace 3.0mm Precision  [XR-302056]

XRAY 302056 - X4 Graphite Front Suspension Brace
Price:
NZD$21.11
Brand:
XRAY
Model:
XR-302056
Condition:
Brand New
Write a review

Fine-Tune Turn-In Response

The XRAY 302056 Graphite Front Suspension Brace is built to tighten the front end of the XRAY X4 2022 model. Constructed from 3.0mm graphite, it cuts down on unwanted flex to deliver a more accurate steering touch.

Best for Aggressive Driving Styles

Fit this brace when you want sharper initial steering; it improves responsiveness at turn-in but can reduce grip through the middle of the corner and on exit. It also helps the car stay more settled on rough and uneven tracks.

Minimal Weight, Solid Performance

The lightweight graphite part is compact yet sturdy, so XRAY 302056 adds stiffness without penalising overall weight, making it suitable for racers aiming for a precise front-end setup.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this brace suit a soft or hard setup?

The brace increases front stiffness, so it pairs well with softer rear or stiffer front springs depending on how you want the car to rotate.

Can I run this on carpet or clay?

It is effective on bumpy or low-traction surfaces where initial steering needs to be crisper; test on carpet and clay to find balance between turn-in and mid-corner grip.

Does installation require special tools?

Installation is straightforward with standard hex drivers used for XRAY X4 components, though check fit against your current suspension geometry before final tightening.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved