XRAY #302261 Composite Left Steering Block with 3 Holes - T Series Steering Arm  [XR-302261]

XRAY #302261 - Composite Steering Block Left - 3 Holes
Price:
NZD$18.41
Brand:
XRAY
Model:
XR-302261
Condition:
Brand New
Write a review

Precision Steering for Older T Series Chassis

The XRAY Composite Steering Block Left, equipped with three mount holes, is a straightforward upgrade for hobbyists restoring or tuning legacy T Series cars. The layout enables measured changes to steering characteristics while keeping the assembly compact and light.

Tailored Fit for Legacy Models

This steering block has been designed to match the mounting patterns of earlier T Series versions, making it easy to swap in. Using the three-hole options you can dial in toe and turn-in behaviour to match your track or surface conditions.

Simple Installation and Light Composite Build

Installation is user friendly and does not require specialised equipment, so club racers and casual builders can fit it without fuss. The composite construction aims for a balance of toughness and low mass to support crisp steering response.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use this on any T Series version?

This part targets older T Series layouts. Verify the hole spacing on your steering knuckle and the block to make sure they match before fitting.

Will changing hole positions require other geometry changes?

Altering the mount position affects leverage and steering rate. You may want to recheck toe, camber, and tie-rod lengths after switching positions to keep handling balanced.

How durable is the composite under club use?

The composite is chosen for a good mix of strength and lightness. Normal club use is fine, but inspect after heavy impacts and replace the block if you spot hairline fractures.

What tools do I need to install it?

Basic hand tools like hex drivers and pliers are sufficient. Keep threadlocker handy if your setup calls for it, and torque fasteners to the chassis maker's recommended values.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved