XRAY 302480 1.0mm Front Anti-Roll Bar for T4 Touring Car - Fine-Tune Setup  [XR-302480]

XRAY #302480 - Anti-roll Bar Front 1.0 mm
Price:
NZD$22.50
Brand:
XRAY
Model:
XR-302480
Condition:
Brand New
Write a review

Tune Front Roll on the XRAY T4

The XRAY 302480 1.0mm Front Anti-Roll Bar is engineered to refine handling on the XRAY T4 1/10 touring car. Being softer than the factory 1.4mm bar, it provides more nuanced control for varied track surfaces and driving lines.

How It Changes Chassis Balance

Installing the 1.0mm bar increases front roll, which tends to raise front traction and can improve turn-in grip while potentially inducing oversteer under certain conditions. A thicker bar lowers front roll and traction, cutting down off-power steering at corner entry and increasing understeer for a crisper initial response.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the XRAY 302480 compatible with aftermarket mounts?

It is designed for XRAY T4 mounting points; some aftermarket setups will accept it but verify hole spacing and bracket style before fitting to avoid interference.

Will this bar reduce understeer?

The 1.0mm bar increases front traction which can reduce understeer in many situations, though overall balance depends on shocks, tyres and weight distribution.

What tests should I run after fitting it?

Try short runs to assess corner entry and mid-corner grip, then adjust rear anti-roll, damping and toe to rebalance handling after the swap.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved