XRAY 302481 1.1mm Front Anti-Roll Bar for T4 Touring Car - Precision Tuning  [XR-302481]

XRAY #302481 - Anti-roll Bar Front 1.1 mm
Price:
NZD$22.97
Brand:
XRAY
Model:
XR-302481
Condition:
Brand New
Write a review

Fine-Tune the XRAY T4 with a 1.1mm Front Bar

The XRAY 302481 1.1mm Front Anti-Roll Bar is crafted for the XRAY T4 1/10 scale touring car and offers a gentler stiffness than the standard 1.4mm unit. This bar lets racers dial in front roll characteristics to suit track conditions and driving style.

Stiffness and Vehicle Dynamics

Changing roll bar stiffness changes how the chassis transfers load in corners. A softer front bar increases chassis roll and can boost front grip, at the cost of possible reduction in rear traction and a tendency to oversteer when off power. A harder bar reduces front roll, tightens turn-in, and can cut down on off-power steering, although it may make the car push on exit.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
XRAY 302481 works with standard T4 mounting points and typical hop-up linkages. Confirm your current hardware and clevis spacing before upgrading.
On low-grip polished surfaces a softer front bar like the 1.1mm can increase front bite and improve cornering, but balancing the rear setup is important to prevent snap oversteer.
Yes. When you reduce front roll stiffness you may need to soften front damping or alter shock pistons to maintain chassis balance through transitions.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved