XRAY 302961 T4'20 ULP 3.0mm Low Rear Graphite Shock Tower - Race Setup Rear Tower  [XR-302961]

XRAY 302961 - T4\'20 Ulp Graphite Shock Tower Rear 3.0mm - Low
Price:
NZD$82.46
Brand:
XRAY
Model:
XR-302961
Condition:
Brand New
Write a review

Precise Rear-End Control for Tight Tracks

Fit the 3.0mm ULP graphite rear shock tower to your XRAY T4'20 to tighten rear grip and improve balance. By locating the shock pivot 4mm lower, you reduce chassis roll and achieve a more neutral steering feel that helps when negotiating technical layouts. Built from premium graphite, the plate offers a stiff yet lightweight upgrade.

How Lower Mounts Improve Handling

Moving the shock mounting point downward lowers the roll center and cuts body roll, making the car more stable under cornering. That translates to smoother transitions and easier mid-corner corrections on demanding tracks.

Compatibility Notes

Engineered for the XRAY T4'20 chassis, this tower uses the original mounting pattern for a clean fit. Its minimal profile keeps additional weight off the rear while maintaining robust construction for regular club use.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do I need different shocks after fitting this tower?

Not necessarily. Many users retain their existing shocks but adjust preload or damping. In some cases a slightly different shock length or spring rate may improve balance.

Will this change my ride height?

Lowering the shock top mount 4mm can affect static pitch and rebound settings. Check ride height after installation and make small adjustments to springs or droop as needed.

Is the graphite durable for regular club running?

Yes, made from high-quality 3.0mm graphite, the tower is designed for repeated use while remaining light and stiff. Normal inspection and maintenance are recommended after heavy impacts.

Will it fit if I run aluminium bulkheads?

The tower is compatible with standard XRAY T4'20 bulkhead configurations. If you have non-standard components, verify bolt spacing before fitting.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved