XRAY 305392 Drive Shaft Pin 2x10 with Flat Spot (2) - Precision CVD Pin  [XR-305392]

XRAY 305392 Drive Shaft Pin 2x10 with Flat Spot (2)
Price:
NZD$16.31
Brand:
XRAY
Model:
XR-305392
Condition:
Brand New
Write a review

Improve CVD Coupling Reliability

The XRAY 305392 Drive Shaft Pin at 2x10mm is engineered for hobbyists who want a reliable pin for CVD linkages. The machined flat spot increases the contact area for the setscrew so the pin holds steady under load.

Design Benefits for Hobby Use

These pins are produced to tight tolerances so each flat spot aligns predictably with the setscrew. That reduced movement in the joint translates to fewer mid-run issues and cleaner power transfer to the wheels.

Practical Fitment Notes

Whether preparing a car for club racing or general maintenance, these pins slot into most CVD applications that accept 2x10 size pins. They are a practical choice for anyone looking to lower the risk of a loose drive shaft pin.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use XRAY 305392 with aluminium or steel drives?

Yes, the pin works with common drive materials, but check the fit and set the screw torque appropriately to suit the hardness of the mating part.

Do these pins need threadlocker on the setscrew?

A light use of threadlocker can help in high-vibration environments, but often the flat spot alone gives enough grip for casual and competition running; choose based on your setup.

Are these pins sold as a pair?

This listing contains two pins sized 2x10mm with flat spots, suitable for replacing worn or missing drive shaft pins in compatible CVD assemblies.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved