XRAY 306235 3.0mm Graphite Floating Servo Mount Forward  [XR-306235]

XRAY 306235 - Graphite Floating Forward Servo Holder 3.0mm
Price:
NZD$37.90
Brand:
XRAY
Model:
XR-306235
Condition:
Brand New
Write a review

Performance Upgrade for T4 2020 Using XRAY 306235

The XRAY 306235 Graphite Floating Forward Servo Holder is a specialist part made to upgrade the T4 2020 platform. Manufactured from 3.0mm graphite, it reduces flex at the servo pod while keeping the overall weight down for improved lap-to-lap consistency.

Why Graphite Works Well Here

Graphite gives a rigid mounting surface without the weight penalty of heavier metals. With the XRAY 306235 in place you should notice steadier steering inputs and less chassis distortion under heavy cornering loads.

Installation Notes and Compatibility

Designed around the T4 2020 chassis layout, the holder installs into the forward servo area with minimal adjustment. Verify hole alignment and orientation before tightening to ensure reliable servo operation.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Yes, its graphite construction and floating mounting are intended to provide the stiffness racers look for while keeping weight low, making it suitable for competitive T4 2020 setups.
The holder does not change the required servo specs, but a high-torque, low-play servo will best exploit the added rigidity for sharper steering response.
Inspect the mounting points periodically and retighten screws as needed. Keep the graphite surface clean and avoid overtightening which can crack composite parts.
No, 3.0mm graphite gives a stiff mount with minimal weight increase, so the performance gain comes without a major mass penalty.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved