XRAY 322461 1.1mm Front Sway Bar for XB2  [XR-322461]

XRAY 322461 - XB2 Anti-roll Bar Front 1.1 mm
Price:
NZD$20.01
Brand:
XRAY
Model:
XR-322461
Condition:
Brand New
Write a review

Tune Front Roll for Better Line Holding

For pilots seeking tighter control of their XRAY XB2, the 1.1mm front anti-roll bar 322461 offers a dependable tuning option. Built from spring steel, the part is designed to stabilise the front end and provide a more predictable steering response on mixed circuits. The etched thickness marking makes identification and setup adjustments quick during practice sessions.

Benefits of the 1.1mm Front Sway Bar

This bar helps limit chassis lean in fast corners, preserving tyre contact and improving exit traction. Selecting the 1.1mm variant changes the front roll rate so you can match the car to looser or grippier surfaces. That precise control helps drivers refine balance without major suspension changes.

Simple Fitment Steps

Mounting the bar on an XB2 is straightforward if you ensure correct linkage geometry and secure fasteners. Check that the bar moves freely through its range and that connectors are free from play. Routine inspection keeps the bar performing consistently over time.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this bar suitable for carpet and asphalt tracks?

Yes, the 1.1mm bar can be used on both carpet and asphalt, but you may need to alter other setup parameters to suit each surface.

Does this replace the stock bar or work alongside it?

This part replaces the factory front bar when you want a stiffer front roll rate, offering a direct swap for the XB2 front assembly.

Can I tune roll feel without changing springs?

Yes, anti-roll bars are a key way to alter roll stiffness independently from spring rates, allowing finer tuning of balance.

How do I tell if the bar is damaged?

Inspect for bends, cracks or worn link ends; any deformation will affect handling and the part should be replaced.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved