XRAY 352042 - GT'22 4mm Graphite Front Shock Tower Lightweight Edition  [XR-352042]

XRAY 352042 - GT\'22 Graphite Front Shock Tower 4mm
Price:
NZD$71.67
Brand:
XRAY
Model:
XR-352042
Condition:
Brand New
Write a review

Lightweight 4mm Graphite Upgrade for Your GT'22

The XRAY 352042 - GT'22 front shock tower uses 4mm graphite to reduce rotating mass at the front while adding useful stiffness. It is aimed at drivers who fine-tune front-end behaviour and want reliable performance across a range of track surfaces.

Benefits of Graphite in Suspension Parts

Graphite delivers strong stiffness with low weight, which improves steering precision without significantly increasing overall vehicle mass. The XRAY 352042 helps keep suspension settings stable under braking and cornering loads.

Fitting Advice and Setup Tweaks

Fit the tower using the standard GT'22 mounting points and ensure screws are snug but not overtorqued. After a few laps check shock angles and make small camber or toe adjustments to suit grip levels. This part is made for direct replacement on the GT'22 chassis.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use this with adjustable camber mounts?

Yes, the XRAY 352042 accepts standard camber mount layouts used on the GT'22. If you run aftermarket camber blocks, confirm the hole spacing matches before fitting.

Will graphite change my shock response?

You will notice a firmer front feel which can alter rebound and compression balance. Fine-tune oil weight and damping to regain the handling balance you prefer.

Does this tower need special screws?

No special fasteners are required; use the GT'22 factory screws and washers. Use threadlocker on steel-to-carbon joints if you run on rough tracks.

How to check for damage after a crash?

Look for hairline cracks at mounting holes and test fitment for any play. Replace the tower if any cracks propagate or if hole clearance increases noticeably.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved