XRAY 352365 Carbon Steering Block Plate for GT 3mm (2)  [XR-352365]

XRAY 352365 GT Carbon Steering Block Plate 3mm (2)
Price:
NZD$37.36
Brand:
XRAY
Model:
XR-352365
Condition:
Brand New
Write a review

Steering geometry: what it changes

The XRAY 352365 GT Carbon Steering Block Plate is engineered to increase the outside wheel steering angle on GT vehicles, enhancing overall steering responsiveness and front-end precision.

Provided as two 3mm carbon plates, these parts alter the steering block area to create a firmer, more immediate turn-in without swapping core suspension parts. Drivers will notice improved feedback when fine-tuning steering balance for competitive or club running.

Installation is aimed at hobbyists comfortable with setup work: remove the stock plate, fit the carbon plate using the chassis' existing fasteners, ensure symmetric alignment, and then re-evaluate toe and geometry. Small steering-link or bump-steer corrections may be required for optimal behavior.

Specifications

  • Item: XRAY 352365 GT Carbon Steering Block Plate 3mm (2)
  • Material: Carbon
  • Model Number: 352365
  • Compatibility: GT

Use these carbon plates when you want stronger outside-wheel steering influence to sharpen turn-in; then tune toe and link geometry to blend the change into your existing setup.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What immediate effects should I feel after fitting these plates?

You should notice quicker steering bite on the outside wheel and stronger initial turn-in. Expect to make modest adjustments to steering trim to restore neutral balance.

Can I fit this to my GT chassis without modification?

Many GT steering blocks accept a 3mm plate, but confirm mounting hole alignment and clearance on your chassis before fitting.

Do I need to change steering link lengths?

In some cases minor link-length adjustments are helpful to correct bump steer or toe after the plate is fitted. Re-check geometry after any change.

Are there any durability concerns with carbon plates?

Carbon is strong and lightweight, but inspect plates periodically for chips or delamination after hard impacts and replace if damage is found.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved