XRAY 353561 Rear Wing Shim Set - Aluminium Upgrade  [XR-353561]

XRAY 353561 Aluminum Rear Wing Shim (2)
Price:
NZD$17.90
Brand:
XRAY
Model:
XR-353561
Condition:
Brand New
Write a review
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"
alt="XRAY 353561 Aluminum Rear Wing Shim (2)" title="XRAY 353561 Aluminum Rear Wing Shim (2)"

Keep Your Wing Locked In with XRAY 353561

The XRAY 353561 Aluminum Rear Wing Shim Set is aimed at racers and weekend drivers running XB and XT series machines who want firmer wing mounting. These shims are machined from aluminium to give reliable support and reduce the chance of the wing coming loose while driving hard.

Why Use Aluminium Shims on Your Wing?

Aluminium offers a great strength to weight ratio, so these shims add stiffness without much mass. The XRAY 353561 parts are made to tight tolerances so they sit correctly in the wing mount, helping your car keep consistent downforce and handling lap after lap.

Compatibility Notes and Quick Fit Guide

Specifically designed for XRAY XB and XT series platforms, the shims are simple to fit as part of a routine upgrade or repair. They work with standard mounting hardware and are a straightforward way to address common wing mounting play.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Are these XRAY 353561 shims compatible with aftermarket wings?

They are sized for XRAY XB and XT series mounting patterns; many aftermarket wings that follow the same hole layout will work, but verify fit before final assembly.

Can I reuse the original wing screws?

Yes, the shims are designed to be used with the stock wing screws. Ensure screws are not worn and avoid overtightening to prevent stripping.

Will these shims change wing angle?

They are slim shims made to improve mounting stability rather than alter wing geometry. Any change to angle should be minimal, but always check setup after fitting.

What maintenance do they need?

Inspect the shims for burrs or damage during regular checks and ensure screws remain tight. Clean contact points if you remove the wing for service.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved