XRAY 356106 Narrow Battery Carbon Servo Mount  [XR-356106]

XRAY 356106 - Carbon Servo Mount - Narrow & Lower Battery Layout
Price:
NZD$55.23
Brand:
XRAY
Model:
XR-356106
Condition:
Brand New
Write a review

Lightweight carbon servo bracket for tight battery positions

The XRAY 356106 carbon servo mount serves as an RC replacement part for chassis that adopt a narrow, low-mounted battery and electronics layout. Its reinforced profile aims to limit flex around the servo area and keep alignment stable during aggressive driving.

It was made to work with the updated receiver box and ESC plate so the servo mount lines up correctly without altering the chassis. Precision CNC work and quality carbon ensure consistent fitment and lower mass versus similarly sized metal parts.

Installation is simple but follow these precautions: confirm the mount pairs cleanly with your receiver box and ESC plate before final torque, align the servo horn to prevent linkage binding, and tighten screws in stages to avoid stressing the carbon plate. As a tuning element, increasing mounting stiffness can sharpen steering response while preserving the steering geometry's movement.

Specifications

  • Item: Carbon servo mount
  • Material: CNC-machined carbon, made in USA
  • Model Number: 356106
  • Compatibility: Narrow and lower battery layout electronics, designed to integrate with updated receiver box and ESC plate

This mount is suitable when your setup positions the battery low and narrow and you want a light, rigid servo mounting option that matches the revised electronics layout.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What makes this carbon mount more rigid than stock?

The mount's reinforced geometry and stiff carbon layup resist bending at the servo interface better than many thin stock plates, keeping the servo aligned under load.

Is any chassis modification required?

No chassis modification should be needed if your receiver box and ESC plate match the updated layout; simply test-fit and secure the mount following alignment checks.

How should screws be tightened to protect the carbon?

Start screws by hand, then tighten in small increments and alternate mounting points to distribute clamping forces. Avoid overtorque and consider using washers if needed.

Can this part help with lap-to-lap steering consistency?

Yes. By reducing unwanted movement at the servo mount, steering inputs remain more direct and predictable, aiding consistent performance across runs.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved