XRAY 357332 Rear Lower Outer Pivot Pins - 3mm Hardened Pair  [XR-357332]

XRAY 357332 Rear Lower Outer Pivot Pin (2)
Price:
NZD$21.42
Brand:
XRAY
Model:
XR-357332
Condition:
Brand New
Write a review

Sturdy Rear Pivot Upgrade XRAY 357332

Upgrade the rear suspension resilience of your RC with the XRAY 357332 rear lower outer pivot pins. These 3mm hardened steel pins are made to handle hard cornering and rough surfaces. Supplied as a pair, the set makes swapping out worn pins quick and straightforward for 1/10 scale cars.

Material and Fit

The XRAY 357332 pins are manufactured from hardened steel to provide reliable strength under load. They work with a wide selection of 1/10 scale chassis, giving flexibility when setting up or refreshing your suspension hardware.

Simple Installation

For best results when installing XRAY 357332 pins, align the suspension links carefully and check for smooth rotation. Periodic tightening and visual checks will keep the rear end performing predictably.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
A basic set of hex drivers, pliers and a small hammer or press can help seat pivot pins correctly. Use thread locker on related fasteners if your chassis manual recommends it.
Compatibility depends on the mount hole size and thickness. Measure the mounting points and compare with the 3mm pin diameter to confirm fitment.
Keep pivot areas clean, avoid grit ingress, and perform routine inspections. Replacing worn bushings or bearings along with pins helps reduce accelerated wear.
A light application of suitable grease or oil on pivot contact points can help, but avoid over-lubricating where it may attract dust and debris.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved