XRAY 358102 Performance 1/8 XB808 Front Big-Bore Shock Absorbers  [XR-358102]

XRAY 358102 XB808 Front Shock Absorbers Complete Set (2)
Price:
NZD$117.51
Brand:
XRAY
Model:
XR-358102
Condition:
Brand New
Write a review

Big-Bore Front Dampers Made for XRAY XB808

Refresh the front end of your XRAY XB808 using this complete big-bore shock set. The 18.5mm hardcoated aluminum bodies are externally threaded for easy collar adjustment, letting you fine-tune ride height and spring preload quickly between runs. Silver springs rated C=0.75 help achieve a neutral balance for most track surfaces.

Engineered Pistons for Consistent Response

These dampers use high-precision composite pistons that maintain a round profile to ensure uniform oil flow and smooth movement. That precision reduces variations in damping and keeps the car reacting predictably through bumps and landings.

Sturdy Shafts and Leak-Resistant Lower Ends

The shock shafts are high-tensile 3.5mm steel with a polished surface to limit friction and wear. Lower assemblies include silicone O-rings and composite shims that provide a tight seal to cut down on oil loss and keep dirt out during aggressive running.

Specifications

  • Outside Diameter: 18.5mm
  • Inner Diameter: 15.3mm
  • Shock Shaft Thickness: 3.5mm
  • Spring Rate: C = 0.75
  • Material: Hardcoated Aluminum, High-Tensile Steel
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I swap these into a different XRAY model?

They are optimised for XB808 front geometry; some XRAY models may accept them with minimal adjustment but always check tower spacing and stroke clearance first.

Are replacement seals and collars available?

Separate service parts like O-rings, collars and shafts are typically available and recommended to keep spares on hand for regular maintenance.

What track conditions suit these shocks?

The big-bore design and C=0.75 springs work well on medium to high grip surfaces and tracks with jumps, where stable damping improves landings and corner consistency.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved