XRAY 362371 Angled Composite Hub for XB4'21 Front Bevel  [XR-362371]

XRAY 362371 - Composite Angled Hub For Bevel Drive Gear - Front Hs Bulkhead - 1 Dot
Price:
NZD$11.76
Brand:
XRAY
Model:
XR-362371
Condition:
Brand New
Write a review

Dial In Differential Height on the XB4'21

The XRAY 362371 Composite Angled Hub provides a practical way to adjust the front differential position on an XB4'21 by 2mm. With three selectable angle positions you can correct drive shaft alignment across different ride heights, helping to preserve efficient power transfer on carpet or loose surfaces. Choosing the upper slot suits lower ride heights common on carpet, while the lower slot keeps drive shafts straight when running higher ride heights off-road. It is a compact tuning part that simplifies setup changes between track conditions.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the hub reversible between left and right sides?

The hub is intended for the front bevel arrangement on the XB4'21 and should be mounted as specified in the manual for correct alignment.

What tools are best for making the adjustment?

A compact hex driver set and a feeler or straightedge to check shaft alignment will make the swap quick and accurate.

Will changing the angle require other setup changes?

In most cases only the hub position is changed, but you should recheck camber and toe as ride height changes can affect overall geometry.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved