XRAY 363353-G Graphite Composite Rear Upright - Grip Tuned  [XR-363353-G]

XRAY 363353-G Composite Upright Rear - Graphite
Price:
NZD$22.67
Brand:
XRAY
Model:
XR-363353-G
Condition:
Brand New
Write a review
alt="XRAY 363353-G Composite Upright Rear - Graphite" title="XRAY 363353-G Composite Upright Rear - Graphite"

Overview of the XRAY Graphite Rear Upright

Constructed from a durable graphite composite, the XRAY 363353-G Composite Rear Upright is engineered to give steady rear-end performance for competitive RC use. Built for both sides, these uprights are particularly useful on surfaces with high grip where stable cornering is essential.

Adjustable Roll Centre Options

The uprights include two roll centre choices with the lower point fixed and an upper mounting that offers three selectable settings. This arrangement lets you fine tune roll characteristics to suit track grip and driving preference.

Bearing Positions and Weight Savings

The layout places larger 5x12mm ball bearings in the outer position to handle greater dynamic forces, while smaller 5x10mm bearings on the inner side lower unsprung weight, improving turn response and drivetrain reliability.

Robust Composite Construction

The compact uprights benefit from a custom composite mix that delivers solid impact resistance without distorting suspension geometry, and the 0 degree toe spec keeps rear behaviour predictable during hard driving.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What should I check for fitment with the XRAY 363353-G?

Verify your car's rear hub mounting pattern and that it accepts the same bearing sizes. The uprights suit high-performance machines that match those dimensions.

When would I use the higher roll centre settings?

Higher roll centre positions reduce body roll and make turn-in crisper, which can help on smooth, high-grip tracks where too much roll slows corner exit.

Are the bearings replaceable and what sizes are used?

Yes, the bearings are standard sizes: 5x12mm on the outer side and 5x10mm internally. Use quality sealed bearings and keep them clean for best performance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved