XRAY 366161 O-Ring Kit - Assorted 2mm 4mm 6mm Seals for RC  [XR-366161]

XRAY 366161 - Set Of O-rings (6x2, 6 Degree 3, 6 Degree 4, 6 Degree 5mm)
Price:
NZD$21.40
Brand:
XRAY
Model:
XR-366161
Condition:
Brand New
Write a review

Compact O-Ring Kit for Maintenance

When dialling in an RC build, small adjustments make a big difference. The XRAY 366161 O-Ring Set offers a simple way to reduce unwanted movement by fitting over 6mm shafts and adding controlled clearance. The set contains 2.0mm, 4.0mm and 6.0mm thickness options.

Where to Use Them

These rings work across many areas of a model, from stabilising linkages to tightening splined parts. They are handy for tuning handling where a small amount of play is causing inconsistent response.

Practical Fitting Notes

To install, make sure shafts and bore faces are clean, then slide the o-ring into position and verify there is no binding. Trim or replace if the ring interferes with intended movement.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will these o-rings affect bearing fit?

They are intended for shaft clearance and may not be suitable as a replacement for bearing seals; use them where small axial or radial gaps need reduction.

Are the sizes labelled on the kit?

The set includes the three thicknesses 2.0mm, 4.0mm and 6.0mm so you can pick the best option for each mounting point.

Can they be used on drivetrain parts?

Yes, they can be used to reduce slop in small drivetrain linkages and couplings, provided the shaft diameter matches.

Do these rings need replacement often?

Replace them if they show wear, hardening or flattening; regular inspection after running sessions will tell you when to swap them out.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved