XRAY 372186 - Front Coil Springs for 4mm Pin C=1.5-1.7 Gold - Race Tune Springs  [XR-372186]

XRAY 372186 - Front Coil Spring For 4mm Pin C=1.5-1.7 - Gold (2)
Price:
NZD$12.01
Brand:
XRAY
Model:
XR-372186
Condition:
Brand New
Write a review

Fine-Tune Front End with XRAY 372186 Springs

Bring sharper front feel to your XRAY X12 range with the XRAY 372186 - Front Coil Springs for 4mm Pin C=1.5-1.7 Gold. Specifically made for 4mm pin setups, these gold springs span the C=1.5-1.7 range to help you find the right compromise between compliance and control.

Consistent Rates from Measured Design

Racer input and testing guided the spring profile, with coil count and wire gauge defining stiffness so behaviour remains predictable lap after lap. The gold coating helps you identify rates quickly during pit changes.

Compatibility with X12 2021 EU and US Spec Chassis

These springs are a drop-in for XRAY X12 2021 EU and US Spec cars and do not require adapters. They are effective on both carpet and asphalt venues, letting you tune front traction for a variety of track conditions.

Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
They are specified for the XRAY X12 2021 EU and US Spec chassis; older variants may need checking for pin and spring seat compatibility.
The gold finish identifies this rate range, but actual stiffness is governed by the wire diameter and coil count rather than colour alone.
They work well on carpet and asphalt; use softer settings for low grip carpet and stiffer for high grip asphalt.
Inspect for nicks and consistent coil spacing after each session and replace springs that show deformation or fatigue.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved