XRAY 372293 0.4mm Front Lower Arm Shims  [XR-372293]

XRAY 372293 Steel Shim 0.4mm - Black (2)
Price:
NZD$14.32
Brand:
XRAY
Model:
XR-372293
Condition:
Brand New
Write a review

Fine tune the front end of XRAY X12 and X14 with 0.4mm shims

Hobbyists wanting tighter setup control will find the XRAY 372293 0.4mm Steel Shims helpful for small, accurate adjustments beneath the front lower suspension arms of XRAY X12 and X14 cars. They are a simple way to change ride height without complex teardown.

Accurate ride height changes

The black steel shims maintain consistent thickness so you can reliably alter front ride height to suit varied surfaces. Their repeatability makes it easier to test different settings between runs.

Robust for regular use

Built from durable steel, these shims stand up to regular track sessions and practical road use, providing a dependable option for racers who push their setups hard.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will XRAY 372293 affect camber or toe?

These shims change ride height under the lower arm and can slightly influence roll centre and geometry; check camber and toe after fitting to confirm setup targets.

How many should I use for big changes?

Use multiple shims in layers if you need larger increments, but make sure there is no binding and that suspension travel remains free.

Are these easy to remove trackside?

Yes, they are straightforward to swap during a pit stop or between runs using standard setup tools, so you can adapt settings quickly.

Should I clean them after salty or wet conditions?

Rinse and dry the shims if exposed to salt or moisture to reduce corrosion risk, then re-lubricate nearby suspension pivots if needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved