XRAY 962045 Thin 4x5x0.2mm Washers for X4 2025 Adjustments  [XR-962045]

XRAY 962045 - Washer S 4x5x0.2 (10)
Price:
NZD$14.01
Brand:
XRAY
Model:
XR-962045
Condition:
Brand New
Write a review

Handy Washers for Fine Deck Tuning on the XRAY X4 2025

If you want to refine the handling of your XRAY X4 2025, the XRAY 962045 4x5x0.2mm washer pack gives a neat tuning option. These slim steel washers go under the top deck flex screws to change how stiff the deck behaves, letting you adapt flex to fast or low bite surfaces. Fit them to either the front or rear to alter initial turn and mid corner balance.

Practical Uses on Track

The XRAY 962045 washers help you make small but meaningful setup changes on the X4 2025. Adjusting deck flex changes weight transfer and front end bite, useful when moving between high grip and lower grip track conditions.

Fitting Advice for Consistent Results

Place washers evenly between the screws to preserve chassis symmetry. Make single step changes and test on track to understand each washer's effect. They can be used on one axle at a time to tune front or rear response separately.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I use these on non XRAY cars?

You may be able to fit them to other models with similar top deck screw patterns, but measure bolt spacing and washer outer diameter before using them.

What handling changes should I expect?

Adding these washers typically stiffens the local deck area, which can tighten turn in and improve stability at higher speeds. Effects vary with other setup choices.

Do I need special tools to fit them?

No special tools are needed beyond the driver you use for the top deck screws. Keep a feeler or small gauge handy to ensure washers sit flush.

Should I change other settings after adding washers?

After altering deck flex, recheck camber, toe and ride height as those settings interact with chassis behaviour. Minor suspension tweaks often complement deck changes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved