XRAY 962051 Thin Spacer Washers 5x10x0.2mm - Pack of 10  [XR-962051]

XRAY 962051 Washer S 5x10x0.2 (10)
Price:
NZD$14.73
Brand:
XRAY
Model:
XR-962051
Condition:
Brand New
Write a review

Precision Shims for RC Tuning

The XRAY 962051 Washer Set contains thin 5x10x0.2mm washers designed to help modelers keep consistent clearances. With a 5mm bore, 10mm OD and 0.2mm thickness these washers suit many tuning and repair tasks on detailed models.

Typical Uses on the Model

These shims are commonly used at suspension pivots, shock towers, servo linkages and anywhere small adjustments are needed. They help limit play and prevent wear between mating parts while preserving intended movement.

Why XRAY Tolerances Matter

Produced to tight tolerances, XRAY washers maintain uniform thickness across the pack so adjustments remain repeatable. Ten pieces let you replace worn items or test different stack heights without hunting for single spares.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the inner and outer diameter again?

The washers have a 5mm inner diameter and a 10mm outer diameter, with a thickness of 0.2mm. Confirm these sizes match your application.

Are these useful for drift or touring setups?

Yes, the thin profile makes them handy for fine tuning suspension geometry and wheel spacing on both drift and touring cars.

How should I store unused washers?

Keep them in a small parts box or labelled bag to avoid loss and to preserve their flatness for later use.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved