XRAY T4 Graphite Front Shock Mount 3.0mm by Arrowmax AM-T4-301960  [AM-T4-301960]

Graphite front tower for T4 handling tweaks

This Arrowmax AM-T4-301960 front shock tower is an RC-grade graphite replacement intended for XRAY T4 series cars. The 3.0mm plate increases rigidity at the front bulkhead and provides a more positive shock mounting surface, helping to maintain suspension geometry during high-load corners.

Designed for hobbyists who adjust chassis flex and front-end balance, the tower uses the stock mounting footprint on compatible T4 layouts so additional parts are not usually required beyond your existing screws and spacers. When fitting, check shock preload and mounting angles as the stiffer tower can change the car's traction characteristics.

Practical advice: run the 3.0mm when you want less chassis flex for sharper steering on grippy tracks; switch to thinner towers to recover bite on low-grip surfaces. Combine the tower with tuned shock valving and spring rates to preserve a predictable handling window.