XRAY T4 MID Chassis Topdeck 2.0mm Upgrade by Arrowmax AM-910013  [AM-910013]

Arrowmax AM-910013 AM Medius Xray T4 MID Topdeck 2.0mm Type 1
Price:
NZD$37.07
Brand:
Arrowmax
Model:
AM-910013
Condition:
Brand New
Write a review

Topdeck option for fine chassis tuning

The Arrowmax AM-910013 is a 2.0mm mid-mounted topdeck produced as an aftermarket tuning component for XRAY T4 MID chassis layouts. It influences chassis flex and longitudinal rigidity to help tune handling balance through corners.

Installation replaces the original topdeck using the T4 MID mounting pattern; keep your existing hex fasteners and confirm there is no contact with radio equipment or linkage geometry. Perform a dry fit to check clearance from the motor, ESC and shock towers before tightening.

Using a thicker 2.0mm topdeck reduces torsional flex relative to thinner options, which can stabilise the car at speed but alter traction on low-grip surfaces. Combine this part with shock and anti-roll adjustments when refining handling.

Specifications

  • Item AM Medius Xray T4 MID Topdeck 2.0mm Type 1
  • Material Not specified by manufacturer
  • Model Number AM-910013
  • Compatibility XRAY T4 MID chassis, T4 Series (T4 2019 Specs 300025)

Use this mid 2.0mm topdeck to alter chassis stiffness on XRAY T4 MID cars; always verify fitment and screw engagement before track running.

Can I keep my current electronics when fitting this deck?

Yes in most cases, but you should check servo and receiver placement for clearance and ensure no wiring sits under the deck that could be pinched.

Is 2.0mm good for carpet or asphalt tracks?

A thicker deck tends to favour high-speed stability, so it can be beneficial on smooth, high-grip surfaces; on loose or low-traction layouts you may notice reduced bite.

How should I evaluate handling after fitting?

Make short test runs, change one variable at a time such as shock oil or roll bar, and record lap times and driver feedback to assess the deck effect.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved