XRAY X4 Bulkhead Top Mount Plates 1mm/2mm by Factory Pro O-XCP014  [FP-O-XCP014]

Price:
NZD$18.00
Brand:
Factory Pro
Model:
FP-O-XCP014
Condition:
Brand New
Write a review

Top bulkhead plate details for X4

The Factory Pro O-XCP014 package contains two upper bulkhead top mount plates made for the XRAY X4 chassis, provided as a 1mm and a 2mm plate, one of each. They are intended as direct replacement or alternate-thickness options for chassis stacking during setup work.

These plates sit where the upper bulkhead mounts on the X4, keeping the factory fastener locations and mount points intact; removal of the existing upper plate and reusing original hardware is the common approach. This pair lets you alter stack height and fine-tune front and rear geometry without changing main components.

Use the plates for comparative setup testing on track or for routine workshop swaps, and keep a spare for quick adjustments between sessions. This product is specified for RC-scale chassis applications only.

Are these suitable for tuned or modified X4 builds?

Yes, they are useful for both stock and modified X4 builds where the upper bulkhead plate location is unchanged. Use them to adjust stack height after other modifications.

Does the set include hardware or bearings?

The set contains only the two plates (one 1mm and one 2mm). It assumes reuse of your chassis original fasteners and does not include extra hardware or bearings.

How should I evaluate the effect of each plate?

Swap plates between runs to compare handling and track position. Small changes in stack height can affect steering feel and weight transfer, so test one change at a time.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved