The Factory Pro O-XCP030S front upper deck is a purpose-built graphite panel for the Xray X4'26 touring car. As a direct-fit unit, the 1.6 mm graphite plate focuses on increasing front-end rigidity while preserving the X4'26 mounting layout. This part should be viewed as a targeted chassis tuning component rather than a cosmetic swap.
Graphite offers higher stiffness per weight when compared with many plastics. At 1.6 mm thickness the deck provides a controlled increase in torsional resistance at the front. The drilling and hole layout follow X4'26 reference points so force paths and attachment points are consistent for drivers testing chassis setup.
The deck is manufactured to match the Xray X4'26 mounting scheme. It keeps the same screw and spacer locations so upper link anchors and the shock tower align as expected. That maintains the intended geometry while altering how loads pass through the front assembly.
O-XCP030S suits experienced builders and racers who make component-level changes on a trusted platform. It is also appropriate for restorers replacing worn plastic decks with a more durable graphite alternative to stabilise chassis behavior.
On the X4'26 platform the front upper deck ties together several structural points. Switching to a 1.6 mm graphite plate subtly moves load transfer between the front bulkhead and shock towers, altering stiffness distribution in a predictable way. This is purely a structural adjustment and does not involve electronics or drivetrain changes.
The O-XCP030S front upper deck provides a repeatable graphite option for Xray X4'26 owners who want to tune front stiffness while keeping established mounting geometry.
Copyright © 2008-2026 rcjaz.co.nz All rights reserved
