YD-2 X3 Chassis Plate 2.5mm Matte Graphite for Yokomo - Y2-002XGA  [Y2-002XGA]

Yokomo Y2-002XGA Matte graphite X3 Main chassis for YD-2
Price:
NZD$199.73
Brand:
Yokomo
Model:
Y2-002XGA
GTIN:
0639342211708
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - YD-2 category
Write a review

Overview of the X3 Chassis Plate

The Y2-002XGA is the X3 main chassis plate built for the Yokomo YD-2 drifting platform. The design accommodates E, S, and R style gearbox formats so the same plate supports several transmission layouts.

At 2.5mm thickness and finished in matte graphite, the plate provides a uniform surface that helps set chassis flex and balance. It serves as the mounting base for electronics, suspension linkages, and gearbox brackets during setup work.

Fitment advice: install the plate using the YD-2 mounting stack, check gearbox orientation before final tightening, and use threadlocker on metal-to-metal fasteners when reusing screws. Also check space around the servo and motor mounts to avoid interference with wiring or nearby parts.

Specifications

  • Item X3 main chassis plate
  • Material Matte graphite, 2.5mm thickness
  • Model Number Y2-002XGA
  • Compatibility DP-YD2SX3 / DP-YD2SX3R / DP-YD2SX3P / DP-YD2SAB / DP-YD2SAR / DP-YD2SAP / DP-YD2SSAB / DP-YD2SSAR / DP-YD2SSAP / DP-YD2SAC

Compatibility

  • DP-YD2SX3
  • DP-YD2SX3R
  • DP-YD2SX3P
  • DP-YD2SAB
  • DP-YD2SAR
  • DP-YD2SAP
  • DP-YD2SSAB
  • DP-YD2SSAR
  • DP-YD2SSAP
  • DP-YD2SAC

As a single 2.5mm graphite option, this X3 chassis plate lets YD-2 builders tune chassis behavior by changing gearbox layout and component placement while keeping a uniform baseplate.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does this plate resist wear and how should I treat it?

The matte graphite finish offers a consistent surface that helps limit uneven wear and provides predictable flex. Clean the plate of grit after running and inspect mounting holes for elongation to maintain integrity.

What thickness and material are used?

This chassis plate is made from matte graphite at 2.5mm thick, chosen to balance stiffness and controlled flex for drift tuning.

Any fitment or maintenance tips?

When installing, confirm gearbox orientation and clearances to servo and motor. Reuse hardware carefully, apply threadlocker where appropriate, and periodically check mounting points for wear.

Which models is this compatible with?

Compatibility includes DP-YD2SX3, DP-YD2SX3R, DP-YD2SX3P, DP-YD2SAB, DP-YD2SAR, DP-YD2SAP, DP-YD2SSAB, DP-YD2SSAR, DP-YD2SSAP, and DP-YD2SAC.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved