Yokomo B10-008FGA Graphite Front Suspension Arm - Track Focus  [B10-008FGA]

Yokomo B10-008FGA Graphite molded front lower suspension arm (55mm-Shock33mm) for BD10
Price:
NZD$23.03
Brand:
Yokomo
Model:
B10-008FGA
GTIN:
0639342202355
Condition:
Brand New
Write a review

Yokomo B10-008FGA Graphite Front Lower Arm Overview

The Yokomo B10-008FGA Graphite Front Lower Suspension Arm is crafted to refine the dynamics of the BD10 platform. Using quality graphite increases component rigidity versus standard arms, yielding crisper turn-in and steadier mid-corner behaviour.

Measurements and Compatible Cars

The arm is produced to match BD10 geometry with a 55mm span between suspension pins and a 33mm measure from the inner suspension pin to the shock pivot, ensuring a straight swap for the supported variants. It works well on tuned and stock BD10 layouts.

Suitable Models

  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • RSR-010
  • RSR-LFGT3RTR
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is the arm compatible with aftermarket hinge pins?

It fits standard BD10 hinge pin layouts, so most aftermarket pins that follow the same geometry will work. Always check pin diameter and clearance before final assembly.

How durable is graphite in contact situations?

Graphite is stiffer and can resist wear well, but like all materials it can crack under heavy impact. Inspect regularly after collisions and replace if you spot damage.

Will this change my car balance?

Switching to a stiffer front arm usually tightens the front end response. Expect slightly sharper turn-in; balance can be tuned back with small suspension or ride height adjustments.

Any lubrication or maintenance needed?

No special lubrication is required for the arm itself. Keep pivot points and pins clean and lightly greased where metal contacts metal to prevent wear.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved