Yokomo B10-202SBLA 20mm Steering Bell Crank - Aluminium BD10/9 [B10-202SBLA]

Yokomo B10-202SBLA Aluminum steering bell crank 20mm for BD10/9

Price:

NZD$69.01

Brand:

Yokomo

Model:

B10-202SBLA

GTIN:

0639342202492

Condition:

Brand New

Quantity:

Quantity Discount
Unit	Price	You Save
2	$62.74 each	$12.53 or 9%
3+	$56.46 each	$37.64 or 18%

Available in shop

Write a review

alt="Yokomo B10-202SBLA Aluminum steering bell crank 20mm for BD10/9" title="Yokomo B10-202SBLA Aluminum steering bell crank 20mm for BD10/9"

Description
FAQ

Steering Geometry Upgrade for BD10/9 with Yokomo B10-202SBLA

The Yokomo B10-202SBLA aluminium steering bell crank refines steering geometry on BD10/9 chassis. Its 20mm measurement from the steering post centre to the linkage pivot adds 2.0mm versus the standard bell crank, modifying the Ackermann to increase the turning angle of the outer wheel for sharper cornering lines.

Smoother Turn-In Behaviour

This component reduces the initial kick relative to servo input, creating a gentler turn-in characteristic useful on technical tracks. The outcome is more consistent handling that helps drivers hold tighter lines through successive corners.

Specifications

Material: Aluminum
Length: 20mm
Compatibility: BD10/9 Chassis

Suitable Models

MRTC-BD11-1
MSR-BD11
MRTC-BD11A-1
MRTC-BD11FA
MRTC-BD11US
MSR-010FE
MSR-010FEA
MSR-BDFWD
MRTC-BD10
MRTC-BD10A
MRTC-BD919S
MRYC-BD919
MSR-BD12
MSR-BD12A
MSR-010
MSR-010A

Is installation straightforward for this bell crank?

Installation is simple for experienced builders: remove the stock bell crank and fit the B10-202SBLA in the same mounting position, then recheck steering geometry and throw.

Will this affect tyre wear or handling balance?

The altered Ackermann can change cornering forces, so monitor tyre wear and adjust toe or camber if the balance shifts after fitting. Minor setup tweaks are usually enough.