Yokomo B8-301SBA Aluminium Adjustable Suspension Mount  [B8-301SBA]

Yokomo B8-301SBA Aluminum separate sus mount
Price:
NZD$37.86
Brand:
Yokomo
Model:
B8-301SBA
GTIN:
0639342204205
Condition:
Brand New
Write a review

Upgrade BD8 Suspension with Aluminium Mount

If you are setting up a Yokomo BD8, the Yokomo B8-301SBA aluminium separate suspension mount fits the rear of the front suspension and lets you change the suspension pin spacing from 43.5mm to 46.7mm. That range gives scope to refine handling and mid-corner feel on different surfaces.

Chassis Compatibility Details

The B8-301SBA works with numerous Yokomo chassis models, including MRTC-BD8, MRTC-BD8A, MRTC-BD8-P, MRTC-BD8AP, MRTC-BD8SV, MRTC-BD818A, MRTC-BD818, MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, and MRTC-BD10LCRA. That compatibility makes it handy for drivers running different BD8 variants.

Practical Setup Advice

When installing and tuning the B8-301SBA, take track grip and steering feel into account. Shorter pin distances can make the car more responsive on entry, while longer distances typically add stability through mid-corner. Make small changes and note lap time differences.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is any special hardware needed to fit the mount?

No special hardware is required; the mount uses standard suspension pin holes on compatible BD8 chassis. Keep existing screws and pins and check torque after installation.

How should I approach tuning for carpet versus bitumen?

On carpet, try slightly shorter pin distances for extra turn-in. On high grip asphalt, extend the pin distance a bit to improve mid-corner balance. Always test with a couple of runs.

Can this mount be used with aftermarket uprights and arms?

It will work with many aftermarket components that fit BD8 geometry, but verify fitment and check for interference before final assembly.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved