Yokomo BD9 Front Topdeck 2.0mm Aluminium - Arrowmax AM-920023 Performance Part  [AM-920023]

Arrowmax AM-920023 AM Medius Yokomo BD9 FWD Topdeck 2.0mm Front
Price:
NZD$21.16
Brand:
Arrowmax
Model:
AM-920023
Condition:
Brand New
Write a review

BD9 front topdeck replacement

The Arrowmax AM-920023 is an aluminium 2.0mm front topdeck made to suit the Yokomo BD9 FWD touring platform. Its metal construction provides a reliable way to change front-end stiffness while keeping original suspension geometry intact.

Fitment centres on the BD9 front chassis area, where the topdeck bridges the shock tower and bulkhead. Installation involves removing the existing topdeck screws and refitting the Arrowmax plate to the factory mounting points; no extra fittings are usually necessary.

On-track, a 2.0mm aluminium deck commonly gives a firmer front end and crisper steering input versus thinner plates, which can be beneficial for drivers chasing sharper turn-in. Introduce this part as part of measured setup changes and note how it affects front grip and mid-corner behaviour.

Designed for the Yokomo BD9 FWD front topdeck area, it fits standard BD9 front stacks; check your chassis version to confirm there are no aftermarket modifications that affect fit.
You can mix materials in the chassis stack, but be aware that aluminium will alter flex characteristics differently than carbon; test changes incrementally.
Increasing front stiffness can change load transfer and steering feel, which may affect tyre scrub and wear patterns; monitor tyres during setup sessions.
Reuse the BD9 original screws, torque them evenly and check steering play after refit; a quick dial-in run helps spot any clearance or trim issues.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved