Yokomo BD9 Mid Chassis 7075 2.0mm Upgrade AM-910019 by Arrowmax  [AM-910019]

Arrowmax AM-910019 AM Medius Yokomo BD9 MID Chassis Aium 7075 2.0mm
Price:
NZD$152.59
Brand:
Arrowmax
Model:
AM-910019
Condition:
Brand New
Write a review

Mid section chassis plate for BD9

The Arrowmax AM-910019 mid chassis plate is a replacement part tailored for the Yokomo BD9 touring car. It provides a straightforward way to change mid-section stiffness and influence on-track handling characteristics.

The component is intended to work within the BD9 chassis architecture and to be used alongside standard BD9 mounting points and hardware. When replacing the original plate, check alignment of motor mount, battery location, and suspension pickup points to maintain intended geometry.

Specifications

  • Item: MID chassis plate
  • Material: Aium 7075
  • Model Number: AM-910019
  • Thickness: 2.0mm
  • Compatibility: Yokomo BD9

Fit this mid chassis to tune flex behaviour and handling bias; always re-torque fasteners and walk through clearances before running laps.

Is the AM-910019 intended for competitive BD9 setups?

Yes, it is aimed at racers who adjust chassis stiffness as part of setup work, but track testing is necessary to find the right balance for your car.

Will this change battery or motor placement?

The plate matches BD9 locations, but verify battery and motor mounts after fitting to ensure nothing shifts the intended geometry.

What should I check after installation?

Check screw torque, clearance under the chassis, and suspension pickup alignment, then run a short test session to confirm handling changes.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved