Yokomo B-MAX2 Steering C-Hub +5 Set 7075 by Arrowmax AM-MAX2-003  [AM-MAX2-003]

Arrowmax AM-MAX2-003 C-Hub +5 Set (7075)
Price:
NZD$56.52
Brand:
Arrowmax
Model:
AM-MAX2-003
Condition:
Brand New
Write a review

Steering C-Hub +5 Option for Yokomo B-MAX2

The Arrowmax AM-MAX2-003 C-Hub +5 set is an aftermarket 7075 aluminium replacement intended for the Yokomo B-MAX2 platform. It shifts the C-hub angle by +5 degrees so you can dial in different front-end behaviour while keeping original suspension geometry intact.

Installation replaces the stock C-hubs and uses the B-MAX2 wheel hub and spindle assembly. When fitting, check clearance around the steering links and front bulkhead, then confirm camber and toe once assembled. This component is focused on setup tuning and does not by itself change service intervals.

For tuning, start from your baseline setup and note steering characteristics after fitting the +5 set. Combine incremental tyre or shock tweaks to determine the overall handling effect and lap time impact.

Specifications

  • Item: C-Hub +5 Set (7075)
  • Material: 7075 aluminium
  • Model Number: AM-MAX2-003
  • Compatibility: Yokomo B-MAX2

Is the AM-MAX2-003 compatible with stock suspension parts?

Yes, it is designed to work with the stock B-MAX2 hub and spindle. Still verify clearances and correct orientation when you fit the new hubs.

Will this change my car's camber behaviour?

Changing the C-hub angle affects steering geometry which can alter camber under load. Check and adjust static camber if needed after installation.

Should I change toe settings after fitting?

Yes, reviewing toe is recommended since the altered hub angle can influence steering return and on-centre feel. Make small adjustments and test on-track.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved