Yokomo B-MAX4 10-degree C-Hub Upgrade 7075 Aluminium by Arrowmax AM-MAX4-005  [AM-MAX4-005]

Arrowmax AM-MAX4-005 C-Hub 10 Set (L&R) (7075)
Price:
NZD$76.11
Brand:
Arrowmax
Model:
AM-MAX4-005
Condition:
Brand New
Write a review

7075 aluminium C-hubs with 10-degree steering offset for B-MAX4

The Arrowmax AM-MAX4-005 C-hub 10 set provides a left and right pair of machined 7075 aluminium hubs specifically for the Yokomo B-MAX4 chassis. These parts replace original plastic hubs to create a stiffer, more predictable interface for steering linkages and upright mounting on 1/10 electric on-road cars.

Specified to introduce a 10-degree change in steering geometry, the set is a tuning component used to adjust the roll centre and steering feel. The overview outlines fitment points, expected handling changes and the setup checks to carry out after swapping to metal hubs.

Specifications

  • Item C-Hub 10 Set (L&R)
  • Material 7075 aluminium
  • Model Number AM-MAX4-005
  • Compatibility Yokomo B-MAX4

Vehicle Compatibility

  • Yokomo B-MAX4

For racers and hobbyists using the Yokomo B-MAX4 seeking a metal replacement and a fixed 10-degree steering option, the Arrowmax AM-MAX4-005 is a clean upgrade that supports repeatable setup tuning on 1/10 on-road vehicles.

These C-hubs are designed for the geometry and mounting of the B-MAX4; fitting to other models requires comparing bolt patterns and clearances.
Expect to re-evaluate toe, camber and steering link lengths, and test on your preferred tyres as the 10-degree hubs change roll centre and front-end response.
The listing covers the left and right 7075 aluminium C-hubs; hardware availability should be checked against your current parts as some pins or studs may be reused.
Use a soft-faced press or proper tools to avoid damaging bearings, check upright alignment, then run a slow steering sweep to confirm no binding before track testing.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved