Yokomo BM-S12100 Rear Damper Spring for B-MAX Series  [BM-S12100]

Yokomo BM-S12100 R.Shock Spring 12100
Price:
NZD$5.63
Brand:
Yokomo
Model:
BM-S12100
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Yokomo BM-S12100 R.Shock Spring 12100" title="Yokomo BM-S12100 R.Shock Spring 12100"

Designed for B-MAX rear damper use

The BM-S12100 spring is made for rear damping duties on B-MAX series rear shocks. It provides a straightforward replacement that will change compression and rebound response when installed in the correct rear shock assemblies.

Installation is standard: remove the shock cap and spring retainer, slide the spring onto the shaft, reseat the retainer and replace the cap. For tuning, adjust preload or spring choice incrementally and trial on the track to judge handling changes rather than relying only on numbers.

Compatibility

  • B-MAX2MR2
  • B-MAX2MR3
  • B-MAX2RS
  • B-MAX43G
  • B-MAX43GF
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
Remove the cap and spring retainer, place the spring over the shock shaft so it seats evenly on the perch, then refit the retainer and cap. Check that the spring is centred and not binding.
It is designed for rear dampers; front use should only be attempted after confirming free length, coil diameter and rate match the front assembly requirements.
Changing spring rate can alter the overall suspension response, so you may need to revisit oil viscosity or damping settings to maintain the desired feel. Test progressively to find the right combination.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved