DP-series Lightweight Steering Bell Crank Pin SD-414BA Yokomo  [SD-414BA]

Yokomo SD-414BA Light weight bell crank pin (2pcs)
Price:
NZD$8.71
Brand:
Yokomo
Model:
SD-414BA
GTIN:
0639342210732
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DPRA category
Write a review

Reduced-mass bell crank pin made for DP-series steering assemblies

This bell crank pin is intended to replace the king pin that secures the centre link to the bell crank. The lighter rotating and reciprocating mass reduces load on steering components and can enhance the initial response of the steering system.

Installation requires removing the original king pin connection at the centre link, installing the supplied sleeve and pin as shown in the chassis diagrams, and fastening with the included screws. After fitting, inspect steering travel and clearances to ensure the linkage moves freely.

Packing includes

  • Light weight bell crank pin x2
  • 3x10mm Titanium Button Head Screw x2
  • King Pin Sleeve x2

Compatibility

  • DP-DPMS
  • DP-DP7C
  • DP-DP8
  • DP-DPRA
  • DP-DPRH
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-TSFCA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-C35A
  • DP-DM13A
  • DP-GDBFA
  • DP-ZCRA
  • DP-1093A
  • DP-TYS15A
  • DP-BL34DA
  • DP-B324RA
  • DP-SR86A
  • DP-PS13A
  • DP-TRS15A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-GDBA
  • DP-JZXA
  • DP-KOS15A
  • DP-IS220A
  • DP-TSS15A
  • DP-BLR34A
  • DP-APEXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • DP-DRG3
  • MRTC-SD9
  • MRTC-86
  • DP-DRG3G
  • DP-N86R
  • DP-N86W
  • DP-N15R
  • DP-N15W
  • DP-N15S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which stock part is replaced by the SD-414BA?

It substitutes the original king pin that connects the centre link to the bell crank, replacing it with a sleeve-and-pin solution fastened by the supplied screws.

Can I use this on any DP-series model?

The item supports the DP-series models listed above. Verify the part location and dimensions on your specific chassis before proceeding with installation.

Will it change steering tuning requirements?

Because it lowers moving mass, the part can make steering feel sharper at initial input. You should still check servo endpoints, ackermann, and overall steering geometry when tuning.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved