Yokomo MD-DHA32 Lightweight Aluminum Differential Height Adjuster  [MD-DHA32]

Yokomo MD-DHA32 Aluminum Differential Height Adjust 3gears+2mm L/R for MD1.0
Price:
NZD$48.57
Brand:
Yokomo
Model:
MD-DHA32
GTIN:
0639342207701
Condition:
Brand New
Write a review

Precise diff height tuning using Yokomo MD-DHA32

The Yokomo MD-DHA32 Aluminum Differential Height Adjuster provides accurate control over the diff height on MD1.0 cars. Its aluminium construction combines durability with a low weight profile so it does not compromise chassis balance.

Designed to fit multiple MD1.0 layouts

Targeted at the MD1.0 series, this adjuster is compatible with several chassis variants such as MDR-010 and SDR-020. The range of adjustment makes it useful for competitive hobbyists who swap chassis or experiment with different setups.

Specifications

  • Material: Aluminum
  • Compatibility: MD1.0 Chassis Series
  • Adjustment Range: 3 gears + 2mm L/R

With the Yokomo MD-DHA32 you can refine handling by making small, repeatable changes to differential height to suit track conditions and driving style.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which MD1.0 cars will this fit?

This unit fits MD1.0 platform variants including MDR-010, MDR-010LTS, SDR-020, MDR-010P, MDR-010R, MDR-010A, MDR-020, SDR-020P, SDR-020R, MDR-020BL, MDR-020P and MDR-020R.

Can I use this for quick setup changes between races?

Yes, the gear style adjustment is designed for quick swapping of heights so you can test different settings between heats with minimal time in the pits.

Do settings affect wear on the drivetrain?

Extreme changes can alter load on driveline components, so make adjustments in small steps and inspect gears and bearings regularly after testing new positions.

Is any special tooling required to fit it?

Standard small hex drivers and a torque-sensitive driver for final tightening are sufficient. Avoid excessive torque to keep the aluminium part in spec.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved