Yokomo RD-018AB Chassis Replacement for DP-RS13SP / DP-FCBN  [RD-018AB]

Yokomo RD-018AB jp
Price:
NZD$79.30
Brand:
Yokomo
Model:
RD-018AB
GTIN:
639342231119
Condition:
Brand New
Write a review
alt="Yokomo RD-018AB jp" title="Yokomo RD-018AB jp"

RD-018AB product summary

The RD-018AB from Yokomo is a replacement chassis-related part for use on specified compatible Yokomo platforms. This summary highlights fit scope, safe installation reminders, and the part's purpose for restoring original component function.

Designed as the direct spare for models noting DP-RS13SP and DP-FCBN compatibility, the RD-018AB should be matched to your car's parts list before fitting. Check that mounting bosses and screw holes line up with existing hardware and verify screw lengths and thread type to prevent over-tightening small fasteners.

In tuning and repair situations this spare restores intended geometry and lets you exchange damaged parts after incidents. Handle as a hobby-grade RC replacement: keep contact surfaces clean and use controlled torque on fasteners for a reliable fit.

Specifications

  • Item Spare part RD-018AB
  • Material Not specified
  • Model Number RD-018AB
  • Compatibility See Compatible Models list below

Compatible Models

  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G2
  • RDR-010G2-1
  • RDR-020
  • SDR-010
  • SDR-010LTS
  • SDR-020
  • SDR-020R
  • SDR-020P
  • SDR-030
  • SDR-030BL
  • SDR-030R
  • SDR-030P
  • DP-RS13SP
  • DP-FCBN

Fit the RD-018AB when replacing worn or broken chassis components on compatible Yokomo models and double-check alignment before final torque to maintain handling consistency.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How robust is the RD-018AB for race use?

The RD-018AB is supplied as a standard spare; evaluate the part visually for wear and confirm mounting integrity after heavy use to determine service intervals.

Do I need different screws than the originals?

If original fasteners are intact use them; otherwise select screws matching original length and thread form and check engagement depth to avoid damaging bosses.

Can I inspect the part before final fit?

Yes. Test-fit the RD-018AB, check hole alignment and clearance, and confirm no interference with drivetrain or suspension parts before tightening.

Where should compatibility be verified?

Cross-check the RD-018AB number with your model's parts diagram and match the mounting geometry and screw sizes listed in the manual before purchase.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved