Yokomo RD-415SAB Front Steering Block for RD/SD/MD Chassis  [RD-415SAB]

Yokomo RD-415SAB jp
Price:
NZD$178.99
Brand:
Yokomo
Model:
RD-415SAB
GTIN:
639342231157
Condition:
Brand New
Write a review
alt="Yokomo RD-415SAB jp" title="Yokomo RD-415SAB jp"

Aluminium Steering Upgrade for RD/SD/MD

This aluminium front steering block serves as a direct upgrade for Yokomo RD/SD/MD drift-scale chassis, replacing the original resin axle assembly with a precision-machined alternative. The unit separates the axle portion, steering block, and upper holder into discrete pieces so you can install only the parts you need and tune alignment more accurately during setup.

Tuning is performed with the provided shim pack to vary trail and kingpin angle, giving you incremental control over steering geometry without having to fabricate spacers. The stiffer aluminium construction improves steering feedback and front tyre tracing, an advantage on grippy surfaces like P tiles and coloured concrete where alignment precision is crucial.

Fitting the assembly is straightforward for those comfortable with front-end service on drift cars: remove the stock axle components, fit the aluminium pieces, and adjust the shim stack until the trail and kingpin angles match your handling goals.

Specifications

  • Item Aluminum front steering block assembly
  • Material Aluminum
  • Model Number RD-415SAB
  • Compatibility RDR-010 / RDR-010G / RDR-020 / RDR-020G / SDR-010 / SDR-020 / SDR-020P / SDR-020R / SDR-030 / SDR-030BL.SDR-030 / SDR-030R / MDR-020 / MDR-020BL / MDR-020P / MDR-020R / MDR-030 / MDR-030BL / MDR-030P / MDR-030R / MDR-030LM / SDR-030CBZ / SDR-030CPI / SDR-030CBL / SDR-030CP / SDR-030CR / DP-RS13SP / DP-FCBN

Compatible Models

  • RDR-010
  • RDR-010G
  • RDR-020
  • RDR-020G
  • SDR-010
  • SDR-020
  • SDR-020P
  • SDR-020R
  • SDR-030
  • SDR-030BL.SDR-030
  • SDR-030R
  • MDR-020
  • MDR-020BL
  • MDR-020P
  • MDR-020R
  • MDR-030
  • MDR-030BL
  • MDR-030P
  • MDR-030R
  • MDR-030LM
  • SDR-030CBZ
  • SDR-030CPI
  • SDR-030CBL
  • SDR-030CP
  • SDR-030CR
  • DP-RS13SP
  • DP-FCBN

As an OEM-style hardware swap, this aluminium steering block raises front-end rigidity and expands alignment choices with the shim set, making it a practical modification for drivers chasing cleaner steering trace and repeatable set-ups on dedicated drift surfaces.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Does the RD-415SAB replace the whole axle assembly?

Yes. The RD-415SAB replaces the resin axle assembly with a machined aluminium assembly that separates the axle, block, and holder for direct replacement and improved stiffness.

How do the shims influence handling?

Shims let you alter trail and kingpin angle in small steps so you can fine-tune steering bite and tyre trace without cutting or reshaping components.

What tools are needed to install it?

Basic hand tools for front-end disassembly are sufficient: remove the stock axle parts, install the aluminium pieces, and use common metric drivers to secure the assembly before adjusting shims.

Will aluminium wear differently than resin?

Aluminium resists flex more than resin and can change failure modes; it improves repeatability and steering feel, though it transfers more load to mating parts, so inspect bearings and pivots during regular maintenance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved